T-750 Model Enrichable Layer Cage

T-750 MODEL ENRICHABLE LAYER CAGE

The materials used in the main structure of the cage consist of high standart hot dip galvanized sheet and wire materials. All galvanized sheets and wires used in cage constructions and cage sections are ISO 9001 certified. Galvanized coating ratio and shape; it is vitally important to prevent deformation caused by fertilizer-induced acid, rust and mold. Deformations in the cages cause shortening of the life of the cage, as well as the health of the animals in the cage. As Güres Technology we are aware of these details.

Cages are designed to be unaffected by ground movements. There is a 2 mm thick cage leg at every 60 cm and wide legged pads placed under these legs. In addition, the cage system is fixed with steel pulling dies once every 10 legs. The system which gains maximum resistance on this count, can be mounted as 8 Tiers without platform(catwalk), 12 Tiers with platform(catwalk).

Cage Sections

The sections are in size of 1200 x 750 mm. The pitch of one section is 650 mm height.

The distance between the bottom wire and the ground is designed to be min. 350 mm in accordance with the European animal welfare law. By the help of level adjusting bolt level of the cage can be adjusted 5 cm up and down.

In the feeding system that is included in the cage system, it is aimed that the chickens can reach to homogenous feed by easiest way. The feed required by the chickens is delivered to the feed distribution system through the steel spiral from the feed stock silo located outside of the shed within the system.

In the feeding system two different feed distribution systems can be offered;  trolley feeding system and chain feeding system. It is aimed to distribute sanitary and homogeneous feed by mixing  with specially designed feed distribution apparatus in feeding system. Through the rail on the cage construction and the special steel rope, the feed trolley distributes the feed homogeneously to the feed troughs located in front of each section controlled by fully automated system.

In the chain feeding system, the feed is distributed by special chains moving in the feed troughs located in front of each section. Both distribution systems can be used as fully automated or by manual.

The feed troughs have a double curved shape with a strong structure and the special design that minimizes the external parasitic problems can occur in the shed. Because of the special design of the feed trough, external parasites cannot exist inside feed trough and around of it.

By the help of suitable slope shaped bottom wires, it is ensured that the eggs can reach the egg canal easily and reliable.

Under the cage bottom wire there are 3 mm thick tensioning wires along the cage. Thanks to these wires that fulfill the function of tensioning, the bottom wires of section is more flexible and more comfortable floorfor chickens. Instead of harder and inflexible floor, a flexible floor is better specially for animal welfare and egg cleaning.

T-750 Model enrichable cage can be converted to the EU-20 model enriched cage removing some parts of the cage, adding perching area, nest box and scracthing carpet. Thus, enrichable cage is conforming to the European Union animal welfare law by converting to enriched cage system.

Dimension of 1200 mm length can be converted to  2400 mm length by removin removing the mediate section wire.

For chickens, drinking water is transported to the nipple water pipes by natural or controlled flow management via antibacterial water reservoirs located in front of each tier of each row. Water pipes with nipple drinkers are located on suitable level that the chickens can reach easily. Chickens can reach their water needs touching plastic and stainless stell red-nipple drinkers on this pipe. Below the nipple drinkers located V-shaped plastic water-catchers. It is also possible to check whether the water reaches to the end of the line by the help of the water level indicator located at the end of the line in each tier of each row. In addition, a warning system sensitive to water shortage on main water line is also included in the system.

In the egg collection system developed by Güres Technology engineers and integrated in the cage systems, the eggs can easily reach to the egg canal with suitable slope shaped bottom wires located in the sections, so that the broken and dirty egg ratio  can be minimized. To egg canal flowing eggs are transported to the egg collection conveyor via special PP egg conveyor belts with anti-static, dust-free properties. In addition, there are spiral shaped special design egg belt cleaning brushes located at the end of each egg canal. As lift and niagara egg collecting system are offered as two different systems. In lift egg collecting system, there is egg collecting conveyor moving up and down by the help of lift, while a fixed egg collecting conveyor is used in niagara egg collecting system. In the niagara egg collecting system, the eggs are collected from egg canals located in each tier of each row at same time(simultaneously) and delivered to the egg collecting conveyor.

There are 1 mm thick PP manure belts that extend along the cage under each tier of each row and allow for perfect cleaning of the manure on the belts. The manure falls on these bands and cleaned easily by pulling with 1 HP manure belt gear motors.

The manure transferred to the horizontal manure discharge conveyor located at the end of the cage inside of manure canal by the help of rollers and scrapers located on each tier of each row. The manure transferring to horizontal conveyor, discharging to vertical manure conveyor located outside of the shed.