Güres Teknoloji

D-120 MODEL BREEDER CAGE

The materials used in the main structure of the cage consist of high standard hot dip galvanized sheet and wire materials. All galvanized sheets and wires used in cage constructions and cage sections are ISO 9001 certified. Galvanized coating ratio and shape; it is vitally important to prevent deformation caused by fertilizer-induced acid, rust and mold. Deformations in the cages cause shortening of the life of the cage, as well as the health of the animals in the cage. As Güres Teknoloji we are aware of these details.

Cages are designed to be unaffected by ground movements. There is a 2 mm thick cage leg at every 60 cm and wide legged pads placed under these legs. In addition, the cage system is fixed with steel pulling dowels in every 10 legs. The system which gains maximum resistance on this count, can be mounted as 4 platforms without platform and 8 kata with platform.

Cage Sections

The sections are in size of 2400 x 1200 mm. The pitch of one section is 820 mm height.

Thanks to the large cage holes, female and male breeding animals are provided to move easily. The fertility rate is very high in the Güres Technology Breeder Cage, which is provided with a comfortable environment with a perch in the middle of the hole and a follicle in the hole.

The cage holes are separated by a special sheet mirror. It is also specially designed for easy placement and removal of breeder animals, with separate chickens and cockerels in each hole.

The bottom layer is designed as 160 mm between the bottom tier and the floor. A height adjustment of 5 cm can be made to the lowest part of the cage by means of the leg adjusting bolt.

In the feeding system that is included in the cage system, it is aimed that the chickens can reach the easiest way to eat and homogenous feed to the chickens. The feed required by the chickens is delivered to the feed distribution system through the steel spiral from the feed stock silo located outside the poultry within the system.

In the feeding system two different feed distribution systems can be offered, namely an Interlaced and a Chain distribution system. It is aimed to distribute sanitary and homogeneous food by mixing the feed with specially designed feed distribution apparatus in the internal feed system. Through the rail on the cage construction and the special steel rope, the bait car moving due to automation distributes homogeneously to the feed grooves in front of the feed hens.

In the chain feed distribution system, the feed is made by means of special construction chains that move in the presence of the feed in front of the chickens and carry the feed. Both distribution systems can be fully automated or manual.

The feed grooves have a double structure with a strong structure and the special design minimizes the external parasitic problems that can occur in the poultry house. Because of the special design of the bait, external parasites cannot shelter around and around the bait.

With the appropriate inclined lower tether found in the cage holes, it is ensured that the eggs can reach the egg channel easily and in a healthy manner.

With the appropriate inclined sub-tails, the eggs are easily accessible to the egg canal and thus the fracture and contamination rate, which can occur in the eggs, has been reduced to a minimum level.

Below the lower wire there is a 3 mm thick wire threading through the head. Thanks to these strands that fulfill the function of stretching, the appropriate inclined lower tele is flexible and has a comfortable ground for chickens. A flexible ground on hard ground is better than animal welfare and health.

For chickens, drinking water is transported to the nipple water pipes by natural or controlled flow management via antibacterial water reservoirs located in front of each floor and row. Nipple water pipes are mounted to the level that the chickens can reach. Chickens meet their water needs from nipples with red plastic and stainless steel construction on this pipe. It is also possible to check whether the water reaches the end of the line by means of the water level indicator at the end of the Nipple water pipe line. In addition, a warning system sensitive to water shortage is also included in the system.

Nipple water pipes have water level indicator at the end of the line. There are nipples made of 16 red plastic and stainless steel materials on both sides of the PVC pipe passing through the cage between the cage holes. The water pipe is mounted at a suitable height and the chickens are aimed to reach the nipples in the easiest way.

There are 1 mm thick PP manure bands that extend along the cage under each cage line and floor and allow for perfect cleaning of the gravel. The fertilizer falls on these bands and it is cleaned by pulling the 1 HP manure belt with the gear motors.

The fertilizer transferred to the horizontal manure discharge conveyor at the end of the coop and the rollers and scrapers on each floor are transferred to the vertical manure discharge conveyor located outside the coop.